-
熱門關鍵詞：
- 美國捷邁 GEMS
- 美國西特 SETRA
- 瑞士ROTRONIC
流量設置：0.50GPM至100.0GPM 接口：1"NPT至2"NPT 主要材質：青銅或不銹鋼 設置類型：固定式 FS-200系列在可以提供測量重復性為1％的精確流量檢測，有多種流量設置和管口尺寸。其牢固耐用的機構可在水或油內保持長壽命的可靠性能。寬大的流動管道使得壓損很少。這些開關可實現在高容量潤滑劑、冷卻和工藝系統中的不正常流量的監測. FS-200可調式系列開關與那些固定式的相比除了具有相同的精度和堅固度之外，還提供了一個附加功能：外部可調能力。有了這些通用開關，您的流量測量的設置將大大增加。僅僅需要一個普通的平口螺絲刀即可進行調校. 應用: 保護軸承或齒輪：油分離器、燃油系統、泵、壓縮機、壓力機 電子或機械：換熱器、半導體制造設備、感應爐、無線電發射器 工藝系統：水過濾和反滲透、加氯器、除冰器、消毒器、蒸發器
流量設置：0.75GPM至14.0GPM 接口：3/4" 主要材質：黃銅 設置類型：可調型 對水和油可進行精確的流量測量，重復性為1%，在可調型產品中，不需要拆卸設備，就可以簡便地進行流量設置。僅需一個普通的平頭螺絲刀，就可以從外部調節殼體內的梭形支路葉片。這類流量開關由耐腐蝕性材料構成，并具有良好的抗振動和抗沖擊能力。當流量過低時，開關可觸動電路報警，以保護軸承、齒輪和冷卻系統. 應用: 保護軸承或齒輪：油分離器、燃油系統、泵、壓縮機、壓力機 電子或機械：換熱器、半導體制造設備、感應爐、無線電發射器 過程處理系統：水過濾和反滲透、加氯、去冰器、消毒器、蒸發器
流速設置：0.25GPM至5.0GPM 口徑：3/4"NPT 主要材質：聚丙烯 設置類型：固定式 FS-500是一款提供了帶有多開關動點和低壓降的低成本流量監測產品。所有接液部分都是聚丙烯或不銹鋼材料，可滿足大多數化學和溫度應用場合。這些材料通過NSF或FDA認證，因此可適用于飲用水、包括加氯器、凈化器和加熱器。FS-500對于包括焊接機、激光器等設備冷卻的理想選擇。標配接線盒，內裝5安培繼電器，可控制高電載，如加氯泵等. 應用: 保護軸承或齒輪：油分離器、燃油系統、泵、壓縮機、壓力機 電子或機械：熱交換器、半導體制造設備、感應爐、無線電發射器 工藝系統：水過濾和反滲透、加氯器、去冰器、消毒器、蒸發器
在用于對正向液體流量的探測，壓力可高達2000PSIG（137.9bar） 獨特的、＊＊凸輪設計，確保壓降較低，不需要波紋管 密封或機械連接 限制*小的插入深度：流量增加后漿片軸可移出液體管道 管線尺寸：1 1/4"及以上 主要結構材質：不銹鋼或黃銅 設置類型：固定式 標準的FS-550開關可雙向感應流體有無流量狀態。提供了兩種長度的漿片。槳在安裝過程中要加以修剪，以使開關在設定流量動作。當管道中流量增加，漿片開始繞開關的軸旋轉，其產生的壓降都小于3PSIG(0.21bar). 使用Gems公司的SAFE-PAK繼電器和容器，這些開關可提供自動流量有/無互鎖，并實現本安而無需防爆外殼和管道. 應用: 壓縮機 熱交換器 渦輪機 發動機 鍋爐 冷卻器 閥門 泵 穩壓器
The SERIES TDFS Thermal Flow Switch uses impulse thermal dispersion measurement technique to indicate whether the flow rate is above or below a user set flow rate. It provides NO and NC NPN outputs and two LED, one green and one red for high and low set point indication.
The Series TDS Thermal Dispersion Flow Switch offers solid state flow detection of non-coating liquids for pump and process protection. SPDT output allows for interfacing with remote PLC or relay control device. The adjustable switch point is factory calibrated at 0.2 fps with LED indication of flow and calibration status. Units feature selectable NO or NC operation and are not damaged by overranging flow velocities.
Protect pumps and valves from dry running with the Series TSP Liquid Flow Controller. The Series TSP combine a liquid flow switch with a failsafe relay controller to detect a flow or no flow situation and provides switching for direct actuation of pumps and valves. Controller features adjustable time delay, selectable NO or NC operation, and LED indication of sensor, relay, and power status. Four models (TSP110S, TSP210S, TSP120S, TSP220S) are designed with an integral flash alarm to provide immediate indication of local alarm conditions.
Series BFM Bulk Flow Monitor provides effective monitoring for most flow/no flow conditions in pipes and chutes. It's sensing techniques, which use a Piezo element, makes the BFM versatile for most flow/no flow applications.The BFM Control offers many unique advance features that exceed the industry standards. The BFM Central Processing Unit monitors movement of almost anything through a pipe or chute system. The BFM is ideal for sensing the presence or absence of materials in Pneumatic Conveying Systems. The BFM offers adjustable sensitivity depending on the application demand. Also, it provides easy installation and requires no maintenance. The unit has LED indicators -- flow (green)/no flow (red).The BFS-1 Sensor yields many advance features. It externally mounts to the outside of the pipe or chute. It provides mounting tabs for easy installation. The Sensor is prewired with 3' wire.